Kenmore PM2010 User Manual

- 10 -
• After the air purifier completes
initialization, the PM2.5 particle value
will be displayed on the screen. The
fan speed will change based on the air
quality when in AUTO mode.
• In the working state, tapping will turn
off the air purifier. The air purifier enters
into the standby state.
CONTROLS & DISPLAY
MODE Button & Mode
Indicator Lights
• Tapping the Mode button will switch the
air purifier into: AUTO mode
→
SLEEP
mode
→
Manual mode
→
AUTO mode.
The corresponding light will illuminate to
indicate the mode.
AUTO mode:
• In the working state, tapping the Mode
button will switch the air purifier to
Auto mode. The AUTO mode indicator
will illuminate. The air purifier will
automatically adjust to the corresponding
fan speed according to the PM2.5
particle value detected by the internal
sensor (see page 10).
SLEEP mode:
• In the working state, after switching to
sleep mode by tapping the Mode button,
the fan will run at the lowest fan speed.
• The sleep mode indicator will illuminate,
and the display screen is off. After 10
seconds, the sleep mode indicator will
turn off.
• In sleep mode, tapping any button will
wake up the air purifier.
MANUAL mode:
• In the working state, tapping the Mode
button will switch the air purifier to
manual mode. The manual mode’s
corresponding indicator light will
illuminate. Fan speed can be adjusted
manually using the Fan Speed button.
NOTE:
When you want to switch the air
purifier from sleep mode to manual mode,
after the unit is woke up from sleep mode,
ON/OFF Button
Tap
to turn on/off the air purifier.
• In the standby state, ON/OFF button
is red. Tap the button to turn on the air
purifier, a "Ding" sound will be heard. The
air purifier will default to AUTO mode
and the AUTO mode indicator light is
on. Meanwhile, the air purifier operates
in the 3
rd
fan speed setting in AUTO
mode before it detects the PM2.5 quality
index. In the process of the PM2.5 sensor
initialization, the PM2.5 index shows “---”
on the display screen and the air quality
indicator light shows green.
• When the PM2.5 sensor completes self-
detection, the air quality indicator light
will vary depending on the air quality.
Please see
REAL-TIME DISPLAY OF AIR
QUALITY
below.
REAL-TIME DISPLAY OF AIR QUALITY
PM2.5
Value
Air
Quality
Air Quality
Indicator Color
Fan
Speed
000-012
Very
Good
Green 1
013-035 Good Blue 2
036-055 Fair Orange 3
056+ Poor Red 4

Kenmore PM2010 Specifications

General

Brand	Kenmore
Model	PM2010
Category	Air Cleaner
Language	English