EasyManuals Logo

Kenmore Washer Operating Instructions

Kenmore Washer
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATING INSTRUCTIONS 40142
WASH/RINSE TEMPERATURE EXTRA RINSE
REGULAR / PERM PRESS
WARM COLD
COLD COLD YES NO
® Q ®
"%0 0WARM
/// //
DOOR
LOCK
FINAL SPiN SPEED
NORMAL FAST
;z i 0,
DELAYED START
FINAL
DELICATES AND
HAND
WASHABLES
WASH
OFF
FINAL SPIN
PERM PRESS
9 7 5 3 1
HOUR
WASH
REGULAR
HEAVY WASH
WASH
SHORT
WASH
SPIN
Before Operating Your Washer
Read your washer Use and Care Guide. It has
important safety and warranty information. It also
has many suggestions for best washing results.
To reduce the risk of fire, electric shock,
or injury topersons, read the IMPORTANT SAFETY
INSTRUCTIONS in yourwasher Use and Care Guide
before operating this appliance.
Operating Steps
Read and followWashing Procedures in your Use
and Care Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
3. Pretreatstains and heavysoil.
4. Add laundry load to the wash drum.
.
Open the dispenser drawer and add the
measured amount of detergent to the
detergent compartment. If desired, add liquid
bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.
The washer will not operate with the drawer
open.
6. Set Wash/Rinse Temperature according to
fabric type and soil level of each load.
7. If desired, select Extra Rinse in the Regular
or Perm Press cycle.
8. Select Final Spin Speed as desired when
using the Perm Press or Hand Washables
cycles.
9. Push in the cycle selector knob and turn it
clockwise to the desired wash cycle.
10. Start the washer by closing the door and
pulling out the cycle selector knob. The
washer will not operate with the door open.
As a safety measure, the door will
automatically lock during the entire wash
cycle.
To stop the washer, push in the cycle
selector knob.
To change a cycle, push in the cycle
selector knob and turn it clockwise to the
desired setting.
Pull out the knob to restart the washer.
11. Remove items when cycle ends. A signal
will sound at the end of the cycle.
Note: From time to time you may see water in
the bleach and fabric softener compartments.
This is a result of the siphoning action and is
part ofthe normal operation of the washer.
Printed in U.S.A. P/N 131964700 (0005)

Other manuals for Kenmore Washer

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenmore Washer and is the answer not in the manual?

Kenmore Washer Specifications

General IconGeneral
BrandKenmore
ModelWasher
CategoryWasher
LanguageEnglish

Related product manuals