EasyManua.ls Logo

KENT 9015 - Page 13

KENT 9015
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
High-pressure cleaners Batch 3000 + 9000 Mobile og Stationary
Date: 18/4-2017
Instruction manual
Page: 13 of 36
© Kent hojtryk\Clean-9000\Brugs-9000-EN-d.307.doc
7. Never point the water jet towards yourself, other persons or animals.
Cleaning of clothes on persons.
8. Avoid splashes on electrical wires and installations.
9. Be careful with sensitive and expensive installations.
10. Avoid cleaning of parts in contact with food.
11. Use only approved detergents suitable for hot-water or cold-water
cleaning.
12. Choose according to eco-friendly considerations and dispose of
empty containers by delivering them to approved local receiving
stations.
13. Wear respiratory protective device, if necessary, if there is a risk of
inhaling vapours. Please read about the hazard class on the label on
the detergent.
14. Frost may cause burst pipes and will immediately destroy the high-
pressure cleaner. Always keep the machine on a frost-free location.
If this is not possible, you must frost-proof the machine as described
in the following section.
15. High-pressure cleaning in freezing weather requires immediate start-
up after which the hot water must be used immediately. Please note
that cleaning may cause ice accumulation.
16. Never leave the high-pressure cleaner running.
17. You can break the high-pressure cleaner by placing wheel chocks, if
necessary.
18. No persons must stay under the high-pressure cleaner when it is
being lifted.
19. Any repair or adjustment must take place only when the main power
has been secured against accidental start-up of the machine. E.g. by
disconnecting the power plug.
20. Assembly and handling by non-skilled persons can cause serious
accidents.
Design changes of the machine's devices is at one's own risk. Impairment of the safety and health func-
tions may put the owner in a judicial unfavourable position especially where the changes or the changes
carried out by the owner himself have caused accidents. Significant changes usually require a new CE
marking of the hot-water cleaner.

Related product manuals