4 models are manufactured with each suitable for a pressure between 150 and 200 bar. A further 3
variations of model “S” which can build up an additional pressure. Can also be delivered as stationary
model. In addition, and a smaller model 3016 high pressure cleaner. All models have identical designs,
and only pump and electric motor may vary depending on the model. See Technical specifications.
Pump:
3-cylinder, vibrationless and noiseless, oil bath lubricated high-pressure plunger pump made of rust-
and acidproof materials. The plungers are made of non-wearing ceramic material. Suitable for
temperatures up to 60° C.
Safety valve:
Built-in adjustable by-pass – continuous variable regulation of water volume.
Pressure regulation:
Working pressure adjustable from 30 bar to max. pressure at the lance. The low-pressure injector
with dosage regulation for detergents is also controlled from the lance.
Mics:
Epoxy-treated steel frame and cover. 10” wheel, 8 m high-pressure hose, spray gun, double-lance
incl. nozzles, 10 m electric cable.
Optional:
- Auto start/stop.
- Detergent container.
To Next Page
Loading...
Need help?
General
