b
efore plugging in
●
Make sure your electricity supply is
t
he same as the one shown on the
u
nderside of the appliance.
I
mportant - UK only
●
The wires in the cord are coloured
a
s follows:
B
lue = Neutral
Brown = Live.
●
The appliance must be protected by
a 13A approved (BS1362) fuse.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
●
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
key
blender
filler cap
locking lid
pouring slots
goblet
blender sealing ring
blender blade unit
power unit
speed + pulse control
ice crushing button
cord storage
m
ulti mill (if supplied)
blender sealing ring
blender blade assembly
multi mill jar
g
rinding mill (if supplied)
mill jar
grinding mill blade assembly
g
rating mill (if supplied)
mill jar
grating mill blade assembly
to use your blender
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
1 Fit the blender sealing ring into
the blender blade unit - ensuring
the seal is located correctly in the
grooved area.
●
Leaking will occur if the seal
is damaged or incorrectly
fitted.
2 Screw the blade assembly onto the
goblet – ensuring the blade
assembly is fully tightened
. Refer
to the graphics on the underside of
the blade unit as follows:
- unlocked position
- locked position
3 Put your ingredients into the goblet.
4 Put the filler cap in the lid.
5 Fit the lid to the goblet and turn
clockwise to lock.
6 Place the blender onto the power
unit with the handle situated to the
right hand side and lock by turning
clockwise until you hear a “click”
.
●
The appliance won’t work if
the blender is incorrectly
fitted.
7 Select a speed (refer to the
recommended speed chart).
4
To Next Page
Loading...
Need help?
General