3. When the message "Security" is displayed, press and
hold the Track Up/Down key for 1 second to enter the
security registration mode.
4. Enter the code using the FM/AM/Track Up/Track
Down keys.
• FM key : Number up
• Am key : Number down
• Track Up key : Cursor right shift
• Track Down key : Cursor left shift
5. Hold down the Track Up key for at least 3 seconds
and the message, "RE-ENTER" appears, so once
again enter the code according to Step 4 above.
6. Press and hold the Track Up key for 3 seconds until
"APPROVED" is displayed.
7. Exit from the test mode. (See 2. How to exit from the
test mode)
(Note) All Clear is not applicable to the security code
of this model.
To Next Page
Loading...
