Do you have a question about the Kenwood KDC-W5541U and is the answer not in the manual?
frequency range | 87.5 MHz – 108.0 MHz |
---|---|
usable sensitivity | 0.7 μV/75 Ω |
quieting sensitivity | 1.6 μV/75 Ω |
frequency response | 30 Hz – 15 kHz |
signal to noise ratio (mono) | 65 dB |
selectivity | ≥ 80 dB |
stereo separation | 35 dB |
frequency range | 531 kHz – 1611 kHz |
---|---|
usable sensitivity | 25 μV |
frequency range | 153 kHz – 281 kHz |
---|---|
usable sensitivity | 45 μV |
spindle speed | 500 – 200 rpm (CLV) |
---|---|
frequency response | 10 Hz – 20 kHz |
total harmonic distortion | 0.008 % |
signal to noise ratio | 105 dB |
dynamic range | 93 dB |
maximum output power | 50 W x 4 |
---|---|
full bandwidth power | 30 W x 4 |
speaker impedance | 4 – 8 Ω |
tone action - bass | 100 Hz ±8 dB |
tone action - middle | 1 kHz ±8 dB |
tone action - treble | 10 kHz ±8 dB |
frequency response | 20 Hz – 20 kHz |
---|---|
input maximum voltage | 1200 mV |
input impedance | 10 kΩ |
operating voltage | 14.4 V |
---|---|
current consumption | 10 A |
installation size | 182 x 53 x 155 mm |
weight | 1.40 kg |