Do you have a question about the Kenwood KDC-W6027 and is the answer not in the manual?
FM frequency range | 87.5 MHz – 108.0 MHz |
---|---|
FM usable sensitivity | 0.7 µV /75 Ω |
FM quieting sensitivity | 1.6 µV /75 Ω |
FM frequency response | 30 Hz – 15 kHz |
FM signal to noise ratio | 65 dB |
FM selectivity | ≥ 80 dB |
FM stereo separation | 35 dB |
MW frequency range | 531 kHz – 1611 kHz |
---|---|
MW usable sensitivity | 25 µV |
LW frequency range | 153 kHz – 281 kHz |
---|---|
LW usable sensitivity | 45 µV |
Laser diode | GaAlAs |
---|---|
Digital filter | 8 Times Over Sampling |
D/A Converter | 1 Bit |
Spindle speed | 1000 – 400 rpm |
CD frequency response | 10 Hz – 20 kHz |
Total harmonic distortion | 0.01 % |
Signal to noise ratio | 105 dB |
Dynamic range | 93 dB |
Channel separation | 96 dB |
Maximum output power | 50 W x 4 |
---|---|
Output power | 30 W x 4 |
Bass tone action | 100 Hz ±10 dB |
Middle tone action | 1 kHz ±10 dB |
Treble tone action | 10 kHz ±10 dB |
Preout level / Load | 2000 mV/10 kΩ |
Preout impedance | ≤ 600 Ω |
Operating voltage | 14.4 V |
---|---|
Current consumption | 10 A |
Installation size | 182 x 53 x 155 mm |
Weight | 1.2 kg |