Kenwood KHH30 multizone

Other manuals for Kenwood KHH30 multizone

Instruction Guide16 pages

Questions and Answers

J
Jennifer GilmoreJul 27, 2025
What to do if my Kenwood Kitchen Appliance stops and the light flashes?
- C
  Cassandra WarrenJul 27, 2025
  If your Kenwood Kitchen Appliance stops during operation and the indicator light flashes, it could be due to an unlocked attachment or outlet cover. Ensure these are correctly located. If they are, the machine might be overloaded or exceeding maximum capacities. Reset the control to the ‘O’ (OFF) position, then restart the machine. Check the recommended speed chart for maximum capacities and reduce the quantity being processed if necessary. You may also need to switch off, unplug, and allow the machine to cool down for 30 minutes.
D
Daniel JacksonAug 1, 2025
Why is the power light flashing rapidly on my Kenwood Kitchen Appliance?
- C
  Casey MedinaAug 1, 2025
  If the Power On light on your Kenwood Kitchen Appliance is flashing rapidly, it indicates normal operation when one or more of the interlocks are not engaged correctly. If you're using an attachment, ensure it's locked into place properly. Also, check that the mixer head is fully in the lowered position, unless you're using the meat grinder attachment. Verify that the speed control is in the ‘O’ (OFF) position.
W
walkerrobinAug 6, 2025
How to fix Kenwood Kitchen Appliance when it won't operate with mixing tools?
- K
  Kayla YatesAug 6, 2025
  If your Kenwood Kitchen Appliance will not operate when using mixing tools, check if the machine is properly plugged in and that the indicator light is on. Ensure the mixer head is locked down correctly and that the outlet cover is correctly fitted, as the machine will not work if it's not. Also, make sure the speed control is reset to the ‘O’ (OFF) position.
J
James KellyAug 10, 2025
Why is the power light flashing slowly on my Kenwood Kitchen Appliance?
- C
  Carla RobinsonAug 10, 2025
  When the Power On light on your Kenwood Kitchen Appliance flashes slowly, it means the appliance is in Standby mode. This mode activates if the machine is left plugged in for over 30 minutes without use, in order to reduce energy consumption. To return to normal operation, turn the speed control to a speed setting and then back to the ‘O’ (OFF) position.
S
Sara ShafferAug 15, 2025
What to do if the dual drive attachment won't operate on my Kenwood Kitchen Appliance?
- S
  sarah53Aug 15, 2025
  If the dual drive attachment on your Kenwood Kitchen Appliance isn't working, start by checking if the dual drive attachment is correctly locked in place. Also, verify that the food processor/juice extractor lid or citrus juicer sieve is properly located.
G
goodmanstacyAug 20, 2025
Why is my Kenwood Kitchen Appliance moving on the work surface?
- K
  Karen BlackburnAug 20, 2025
  If your Kenwood Kitchen Appliance is moving on the work surface, regularly check that the feet on the underside of the machine are clean and dry.