Do you have a question about the Kenwood MIDl M-959 and is the answer not in the manual?
Brand | Kenwood |
---|---|
Model | MIDl M-959 |
Category | Stereo System |
Language | English |
Guide to setting the AC voltage selector switch on the rear panel.
Warnings to prevent fire, electric shock, and potential hazards.
Guidelines for safe use of power sources and cords.
Ensuring proper ventilation and avoiding moisture and heat.
Precautions against electric shock and internal component access.
Safety advice for carts, stands, nonuse periods, and service needs.
Explanation of each button's function on the remote control.
How to adjust master volume, tone controls, and presence/rear volume.
Steps to tune to stations and store them in memory.
How to tune to radio stations by entering their frequency.
Selecting playback modes and Dolby Noise Reduction.
How to skip tracks using the DPSS system.
Step-by-step guide for ordinary cassette tape recording.
Explanation of the auto-bias function for optimal recording.
Procedures for stopping and re-starting recording.
How to start CD playback and cassette recording simultaneously.
How to start turntable playback and cassette recording simultaneously.
Overview of CCRS recording types like Fade, Erase, and Cross-fade.
Details on how the CCRS system automatically sets levels and bias.
How to perform fade-out and fade-in recording during CD playback.
How to erase and re-record tracks automatically.
Aligning speaker volumes and using the test tone.
Adjusting presence volume, rear volume, and seat position.
Procedure for setting up timed radio broadcast reception.
Procedure for setting up timed CD playback.
Procedure for setting up timed tape playback.
Procedure for setting up timed radio broadcast recording.
Common problems and solutions for the remote control unit.
Troubleshooting sound output and speaker problems.
Troubleshooting clock display and timer operation problems.
Resolving issues with receiving radio stations and interference.
Troubleshooting issues with cassette deck operation and playback.
Resolving problems related to recording levels and noise.