Kenwood RV-7000 - Speaker Connection Diagrams (RV-7000); RV-7000 Speaker Wiring Illustration; Speaker Connection Best Practices

16
RV-7000/RV-6000/RA-5000
Connections
Connecting speakers
Front speakers
Right Left
Right
Left
Center speaker
Surround speakers
• Speaker impedance : 6 – 16Ω
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be
unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly.
• RV-6000 :
Subwoofer sound comes out at the both Subwoofer terminals (SPEAKERS and PREOUT) simultaneously depending on speaker setup.
• RV-7000 :
When only one surround back speaker is used, connect it to the [SURROUND BACK L] terminal.
Powered
Subwoofer
Right
Left
Surround Back speaker/
Front Height speakers
Power Amplifier
RV-7000
B60-5827-08_00_En.indd 16 10.8.3 11:07:44 AM