English
45
Listening to radio broadcasts
Presetting radio stations
manually
The Radio Data System auto memory function assigns preset
numbers to Radio Data System stations starting from preset
number "1". Therefore, be sure to execute the Radio Data System
auto memory function before using the following operations to
manually store AM stations and other FM stations, and Radio Data
System stations.
See <Auto Memory>.
08/7,&21752/
0(025<
1 Tune in the station you want to store.
2 Press [MEMORY] while receiving the station.
Proceed to step 3 within 20 seconds.
If more than 20 seconds elapse, press [MEMORY] again.
3 Use [MULTI CONTROL ∞/5] to select one of the
station presets (1 – 40).
4 Press [MEMORY] to confirm the setting.
Repeat steps 1 to 4 to store as many stations as necessary.
If you store a station at a previously used preset, the
previous station will be replaced by the new one.
Receiving preset stations
781(5
1 Press [TUNER] to select tuner as the source.
2 Enter the number of the preset station you want to
receive (up to "40" preset numbers).
Press the Numeric keys in the following order:
For preset No.15: [+10] and [5]
For preset No.20: [+10], [+10] and [0]
Preset number
• If you make a mistake entering a two digit number, press
[+10] repeatedly to return to the original display and start
again.
Numeric keys
B60-5827-08_00_En.indd 45 10.8.3 11:08:26 AM
To Next Page
Loading...
