English
47
Listening to radio broadcasts
3 Press [PTY] to start searching.
Example: Searching for a Rock Music broadcast.
Display while searching.
Blinks
Display when a station is received.
Goes out
Station name display
No sound is heard while "PTY" is blinking.
If the desired program type cannot be found, "NO PROG" is
displayed, then after several seconds the display returns to
the original display.
To select another program type
Repeat steps 1, 2 and 3.
Using the DISPLAY key
',63/$<
1 Pressing [DISPLAY] changes the contents of the
display.
Each press switches the display mode as follows:
1 PS (Program Service) name display
2 RT (Radio Text) display
3 Frequency display
1 PS (Program Service) name display:
The station name is displayed automatically when an Radio
Data System broadcast is received.
If no PS data was sent, "NO PS" is displayed.
2 RT (Radio Text) display:
Text data accompanying the Radio Data System broadcast
scrolls across the display. "NO RT" is displayed if the current
Radio Data System station does not provide RT data.
3 Frequency display:
Displays the frequency of the current station.
B60-5827-08_00_En.indd 47 10.8.3 11:08:29 AM
To Next Page
Loading...
