Kenwood RV-7000 - Adjustments According to Playing Source; Speaker Level Adjustment by Source; Input Level and Midnight Mode Settings; Panorama, Dimension, and Center Settings

English
49
Sound adjustment
The audio can be adjusted as desired according to the source
being played.
6281'
08/7,&21752/

08/7,&21752/∞/5
1 Press [SOUND] to enter the surround adjustment
mode.
Each press switches the mode as follows.
Note that some items are not displayed depending on
speaker settings and listen mode.
Settings of RV-7000
Display
Setting item
Range
"LH" Left Height speaker level -10 – +10dB
*1
"C" Center speaker level -10 – +10dB
"RH" Right Height speaker level -10 – +10dB
"SR" Surround Right speaker level -10 – +10dB
"SBR" Surround Back Right speaker level -10 – +10dB
"SB" Surround Back speaker level -10 – +10dB
"SBL" Surround Back Left speaker level -10 – +10dB
"SL" Surround Left speaker level -10 – +10dB
"SW" Subwoofer level -10 – +10dB
"INPUT" Input level -6, -3, 0 *2
"MIDNIGHT" Midnight mode
"AUTO", "ON",
"OFF"
*3
"PANORAMA" Panorama mode "ON", "OFF"
*4"DIMENSION" Dimension
"CENTER WIDTH" Center Width
*6
"CENTER IMAGE" Center Image 0.0 – 1.0 *5
Input source
name
Exit the adjustment mode.
Settings of RV-6000
Display
Setting item
Range
"C" Center speaker level -10 – +10dB
*1
"SR" Surround Right speaker level -10 – +10dB
"SB" Surround Back speaker level -10 – +10dB
"SL" Surround Left speaker level -10 – +10dB
"SW" Subwoofer level -10 – +10dB
"INPUT" Input level -6, -3, 0 *2
"MIDNIGHT" Midnight mode "ON", "OFF" *3
"PANORAMA" Panorama mode "ON", "OFF"
*4"DIMENSION" Dimension
"CENTER WIDTH" Center Width
*6
"CENTER IMAGE" Center Image 0.0 – 1.0 *5
Input source
name
Exit the adjustment mode.
Settings of RA-5000
Display
Setting item
Range
"SW" Subwoofer level -10 – +10dB
"INPUT" Input level -6, -3, 0 *2
"MIDNIGHT" Midnight mode "ON", "OFF" *3
Input source
name
Exit the adjustment mode.
*
1
The adjustment is only temporary for the current input
selection. The value will return automatically to the original
setup value when the power is turned on/off or when the
input selection is changed.
*
2
Analog source only
*
3
Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD and
DTS signal only.
"AUTO" can be selected only in the Dolby TrueHD signal.
*
4
Pro Logic II Music mode and Pro Logic IIx Music mode only
*
5
Neo:6 Music mode only
*
6
"CENTER WIDTH" and "CENTER IMAGE" can be selected only
when the center speaker is installed.
2 Use [MULTI CONTROL ∞/5] to adjust the desired
item.
For detailed adjustment method, see the explanation of
each item.
To exit the sound adjustment mode
Press [SOUND].
Adjustments according to the playing source
B60-5827-08_00_En.indd 49 10.8.3 11:08:33 AM