Need help?Do you have a question about the Kenwood SS-592 and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | SS-592 |
| Category | Computer Hardware |
| Language | English |
Record the unit's model and serial numbers for future reference and service.
Carefully unpack the unit and check for any shipping damage.
Units are designed for 120 volts AC only; caution regarding plug use.
Units are for 240 volts AC only; mains plug removal instructions.
Units designed for 240V AC (Australia) or 230V AC (Europe).
AC voltage selector switch on rear panel for voltage matching.
Do not expose the appliance to rain or moisture.
Do not remove cover; refer servicing to qualified personnel.
Connect to power supply type described in operating instructions or marked on appliance.
Route cords to avoid walking on or pinching; do not pull or stretch.
Ensure grounding or polarization means are not defeated.
Ensure proper ventilation; do not block openings, keep away from walls.
Do not use near water (bathtub, sink, basement, pool).
Avoid extremely low temperatures; ideal is above +5°C.
Situate away from heat sources like radiators or stoves.
Prevent objects falling in or liquid spilling; avoid contact with internal parts.
Never remove enclosure; refer servicing to qualified personnel.
Keep unit away from sources of magnetic fields (TVs, speakers).
Use a clean dry cloth; do not use volatile solvents.
Move appliance and cart combination with care to prevent overturning.
Unplug the power cord when left unused for a long period.
Turn power OFF and pull cord immediately if detected.
Unit requires service if cord/plug damaged, liquid spilled, exposed to rain, or not operating normally.
User should not attempt service beyond instructions; refer to qualified personnel.
Ground antenna system for protection against voltage surges and static charges.
Locate outdoor antenna away from power lines.
Do not connect other equipment with higher power consumption to rear AC outlet.
Details connections for the KA-892 or KC-992 amplifier.
Ensure system control cord plugs are fully inserted for remote control.
Steps for connecting to TAPE 2/ADAPTOR jacks on KA-892/KC-992.
Steps for connecting to an ordinary amplifier or receiver.
Instructions on how to connect speaker wires.
Provides Dolby Surround effect for movie theater sound.
Natural reverberation effect for movie theater sound.
Powerful sound effect for concert hall atmosphere.
Guidance on positioning rear speakers for optimal surround effects.
Explanation of delay time's role in sound field and presence.
How to select the DOLBY SURROUND mode.
Adjusting the delay time for optimal surround sound.
Adjusting balance for dialogue minimization.
Instructions for playing video software with Dolby Surround.
How to select THEATER or HALL surround modes.
Adjusting delay time for THEATER mode; fixed for HALL mode.
Instructions for playing music sources in surround modes.
Troubleshooting steps for no sound output.
Troubleshooting for small or no sound from rear speakers.
Troubleshooting for remote control issues with the amplifier.
Statement on Class B limits for radio noise emissions.
Warning about potential interference and user authority.
Equipment tested and found to comply with Class B digital device limits.
To Next Page
