Kenwood UD-952 User Manual

Important warnings and cautions to prevent fire, electric shock, and ensure safe operation.

Overview of buttons, indicators, and displays on the preamplifier/tuner unit.

Explanation of controls and indicators on the power amplifier/graphic equalizer unit.

Details on the CD player unit's buttons, indicators, and display functions.

Description of the cassette deck unit's operation keys, indicators, and holders.

Diagram and explanation of all buttons and functions on the remote control unit.

How to program up to 32 tracks from multiple CDs in a specific order.

How to use DPSS for skip search, dash & play, rewind, and one-program repeat.

Steps for selecting tuner input, band, tuning mode, and station.

How to tune into radio stations by manually entering the desired frequency.

How to store up to 20 stations with preset numbers for easy recall.

Automatic adjustment of tape bias for balanced recording.

Automatic setting of recording level using CRLS for optimal sound.

Explanation of the Computer Recording Level System for automatic level setting.

Instructions for starting high-speed or normal-speed dubbing between tapes.

Flowchart to choose between program, cross-fade, timed, AI, or fade edit recording.

Explanation of the Computer Controlled Recording System for one-touch CD to tape recording.

Recording CD tracks in programmed order, handling tape end interruptions.

Detailed steps for programming CD tracks and starting the edit recording.

Steps for performing cross-fade editing, either with programmed or direct track order.

Procedure for timed edit recording, specifying tape length and conditions.

Procedure for AI edit recording, accommodating shorter tape lengths by fading out track endings.

Procedure for fade edit recording, fading tunes at tape ends for smooth transitions.

Recording CD tracks with automatic order change to fit tape length without interruption.

Accommodating shorter tape lengths by fading out CD track endings.

Connecting tunes by fading out/in, overlapping sounds for seamless transitions.

Fading out tunes at tape end and fading in at tape start for smooth transitions.

Using AI AUTO to automatically set equalizer and volume balance for CD playback.

Steps for manually creating and storing custom equalizer curves.

Recording equalizer curves optimized for car or headphone stereo playback.

Using AI FOCUS to optimize presence effects and tone for CD playback.

Using Front 4-channel (F.4CH) and Front 2-channel (F.2CH) modes for presence effects.

Using Dolby 3 STEREO for improved center imaging in stereo programs.

Providing movie-theater-like Dolby Surround effects with rear speakers.

Using F.2CH or F.4CH modes to enjoy music with presence effects.

Controlling sound field expansion using ASFC and MULTI LEVEL CONTROL.

Combining presence effects with environmental sound from OMNI speakers.

Adjusting the feeling of sound depth using VOCAL and INST modes.

Setting up and adjusting Dolby 3 STEREO for improved center imaging.

Setting delay time and volume balance for optimal Dolby Surround playback.

How to operate Dolby Surround mode and calculate delay time.

Reserving up to four timer programs for automatic playback or recording.

Advanced timer functions for gradual volume increase or CD/radio playback.

Steps for reserving timer programs, including setting day, ON/OFF times.

Selecting playback/record mode, source, and preset station for timer reservation.

Troubleshooting common problems with remote control operation and remedies.

Troubleshooting for no sound, low volume, or speaker connection problems.