To Next PageTo Next Page
Need help?Do you have a question about the Kenwood XD-571S and is the answer not in the manual?
General| Type | Stereo System |
|---|---|
| Brand | Kenwood |
| Model | XD-571S |
| CD Player | Yes |
| FM Tuner | Yes |
| Tuner Bands | FM/AM |
| Bluetooth | No |
| USB Port | No |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | 0.1% |
| Signal to Noise Ratio | 80dB |
Ensures correct voltage setting for safe operation and prevents damage.
Critical warnings and safety symbols to prevent fire, electric shock, and ensure proper usage.
Specific disposal requirement for batteries in the Netherlands.
Explanation of Class 1 Laser Product marking and safety.
Highlights the 3D Wide FL display and the multi-control jog dial for enhanced usability.
Details on built-in subwoofer and versatile tone/sound field adjustments.
Describes the convenience of the 3-disc carousel CD player.
Includes demonstration mode, unpacking, and accessory listing.
Guidelines for proper handling, cleaning, and storage of compact discs.
Specifies which types of discs (CD, CDV) can be played on this unit.
Warnings against using damaged discs or cleaning discs that may cause malfunctions.
Advice on tape safety tabs, storage, recording, and tape length limitations.
General instructions for connecting system components and accessories correctly.
Guidance on positioning and connecting the supplied AM loop antenna for optimal reception.
Diagram illustrating rear panel connections on the main unit, including antenna and speaker terminals.
Instructions for properly connecting speaker cords to the main unit and speakers.
Advice on preventing color blotching on TVs caused by speaker magnets.
Recommendations for maintaining proper ventilation by leaving adequate space around the unit.
Instructions for setting up the temporary indoor FM antenna.
Steps for attaching speaker pads and connecting front speakers securely.
Diagrams for connecting optional MD recorders and surround speakers.
Explanation of the SURROUND switch function for surround playback.
Instructions for connecting audio sources via the optical digital output.
Guide for connecting a 75-ohm coaxial cable from an outdoor FM antenna.
Information on connecting an antenna adapter for different antenna types.
General instructions for connecting system components and accessories correctly.
Guidance on positioning and connecting the supplied AM loop antenna for optimal reception.
Diagram illustrating rear panel connections on the main unit, including antenna and speaker terminals.
Instructions for properly connecting speaker cords to the main unit and speakers.
Recommendations for maintaining proper ventilation by leaving adequate space around the unit.
Instructions for setting up the temporary indoor FM antenna.
Steps for attaching speaker pads and connecting front speakers securely.
Diagrams for connecting optional MD recorders and surround speakers.
Explanation of the SURROUND switch function for surround playback.
Instructions for connecting audio sources via the optical digital output.
Details on connecting the super woofer for enhanced low-frequency playback.
Guide for connecting a 75-ohm coaxial cable from an outdoor FM antenna.
Information on connecting an antenna adapter for different antenna types.
Overview of buttons, displays, and indicators on the main audio unit.
Details on the buttons and functions of the receiver section.
Explanation of buttons for cassette playback, recording, and dubbing.
Description of buttons for CD playback, track selection, and disc management.
Explains indicators related to Radio Data System and tuner operations.
Describes indicators for CD playback status and cassette deck operations.
Covers character info, tone/sound fields, timers, track numbers, and jog dial guide.
Details on the visual spectrum analyzer and its different display modes.
Covers keys for playback, track selection, search, and general unit navigation.
Buttons for settings, adjustments, input selection, and sound modes.
Buttons dedicated to controlling RDS features like TA, NEWS, and INFO.
Instructions for inserting batteries into the remote control unit.
How to use the remote control to power on/off and operate the unit.
Adjusting radio channel spacing for different regions.
How to use the jog dial for various function settings and operations.
Setting the FM reception mode to POLAR or PILOT TONE for Russia.
Step-by-step guide for basic unit operation and sound output.
How to temporarily mute the sound output using the MUTE function.
Adjusting the subwoofer output level to match music genre and preference.
Enabling or disabling the EX.BASS feature to enhance bass response.
Explanation of standby mode and the automatic power-off function.
Steps for loading a disc and initiating CD playback.
How to skip tracks forward or backward during CD playback.
Information on how to view elapsed or remaining time for tracks and discs.
Methods for skipping tracks and performing high-speed search on CDs.
How to pause and stop CD playback.
Selecting and playing specific tracks from a CD using numeric input.
Steps for loading tape, selecting deck, and starting playback.
Features for reverse mode selection and Dolby NR settings during playback.
How to fast wind tape in either direction and stop tape transport.
Configuring tape reverse mode and Dolby Noise Reduction for playback.
Understanding the indicators showing tape movement direction.
How tape playback continues automatically from one deck to another.
Tips for using the tape counter as a reference for recording/playback.
How DPSS finds non-recorded spaces to locate music programs.
Important notes on tape types that may affect DPSS functionality.
How to switch between FM, AM (MW), and LW broadcast bands.
Methods for tuning to stations using auto or manual tuning.
Automatically stores available stations into memory for quick access.
Manually selecting and storing stations into memory.
Choosing between auto tuning for noisy reception and manual tuning.
Step-by-step guide for recording audio onto a cassette tape in Deck B.
Configuring tape reverse mode and Dolby Noise Reduction for recording.
Choosing the audio source (TUNER, CD, TAPE, AUX) to be recorded.
Initiating the recording process onto the cassette tape.
Using the A/B key to reduce beat noise interference during MW/LW recording.
How to start CD recording automatically when CD playback begins.
Choosing tape input and setting double-side or one-side dubbing.
Steps to start dubbing, including transport direction selection.
Initiating the tape copying process from Deck A to Deck B.
How to select and listen to tracks in a specific, user-defined sequence.
How to check, replace, add, or delete tracks in a programmed playback sequence.
How to start programmed playback and exit the program mode.
Setting the unit to repeatedly play a selected disc.
Setting the unit to repeatedly play all discs in the changer.
How to cancel any repeated playback mode.
Setting the unit to repeatedly play a single selected track.
Setting the unit to repeatedly play all tracks in a programmed sequence.
How to start and stop repeat playback modes.
Choosing between random playback of one disc or all discs.
How to select another track during random playback or return to the beginning.
Options to repeat random playback or cancel it.
Introduction to RDS features like PTY, PS Name Display, and EON.
Prerequisites for RDS, band setting, and display content switching.
Order of display preference for RDS information when a broadcast is received.
Setting FM band and presetting RDS stations before performing PTY search.
How to enter the PTY search mode.
Methods to select a desired program type using P.CALL keys or numeric keys.
Initiating the search for stations broadcasting a specific program type.
How to change the desired program type and restart the search.
Setting FM band and auto-presetting stations for EON function.
Choosing information types like TA, NEWS, or INFO for reserved listening.
Selecting an RDS station with EON enabled for automatic information program switching.
How the unit waits for and switches to desired information programs.
How the unit waits for information from tuned stations lacking EON data.
Understanding the TP indicator for traffic announcement programs.
Selecting and recording individual tracks from a CD.
Recording all tracks from a CD in sequence.
Adjusting CD recording to fit a specific tape length.
Recording a sequence of programmed tracks from multiple discs.
Ensuring CD is in playback mode and other settings are ready.
Steps to start recording a single selected track from a CD.
Steps to start recording an entire CD, including DUBBING and CD RECORD selection.
Choosing the specific CD to be recorded.
How to start the recording process of an entire CD.
Steps to start the CD EDIT process by selecting DUBBING and CD EDIT.
Choosing the disc and entering the desired tape recording time.
Initiating the CD editing and recording process.
Steps to start programmed recording, including DUBBING and CD PGM RECORD selection.
How to program desired tracks from CDs for recording.
Initiating the recording of programmed CD tracks onto tape.
Adjusting the left/right sound balance and external input volume level.
Choosing from preset or custom equalizer patterns to suit music genres.
Switching between different display modes for the spectrum analyzer.
How to manually create and store custom equalizer settings.
Activating and adjusting the SRS 3D sound effect for immersive audio.
Steps for connecting a microphone and playing music for karaoke.
How to adjust volume balance and sing along with accompaniment.
Entering the mode to set the unit's internal clock.
Procedure for setting the hour and minute for accurate time display.
Setting the unit to automatically turn off after a specified period.
Simple timer function to play a selected source for one hour.
Actions needed before setting timers, like preset stations or loading media.
Steps to select program number, ON time, and source for timer operations.
Specifying the time when the timer operation should end.
Finalizing timer playback or recording reservations.
Choosing which timer programs to activate and setting power status.
How to turn off programmed timers when they are not needed.
Procedure to change or overwrite existing timer program settings.
Instructions for cleaning heads, capstans, pinch rollers, and the unit's exterior.
Includes SRS Labs info, transportation notes, condensation caution, and reference details.
Details on which settings are retained when the power is unplugged.
Procedure to reset the microcomputer to resolve malfunctions or erroneous displays.
Solutions for problems like no sound, distorted sound, or speaker issues.
Troubleshooting steps for the remote control not operating.
Solutions for issues like no operation, demonstration start, or preset station reception.
Troubleshooting for cassette deck problems like no sound, tape winding, or DPSS malfunctions.
Resolving problems with starting recording or changed recorded track volume.
Troubleshooting for CD playback errors like disc not playing, sound skips, or dirty discs.
Technical details for the amplifier, cassette deck, CD player, and general unit.
Technical details for the different speaker models included or compatible.
Frequency ranges and other technical details for the FM, MW/AM, LW, and SW tuners.
Table comparing features like surround sound, subwoofer, and RDS across different XD Series models.
