Kenworth T470 - Exhaust INFORMATION; Table 3-21. UNLADEN Stack HEIGHT

Section 3
Dimensions
08/09
3-27
EXHAUST INFORMATION
This section includes information on how to calculate tailpipe heights, and reference information for PTO clearance.
Optional equipment is not shown.
Tailpipe Stack Height Calculation
TABLE 3-20. Stack Height
Dimension A
DPF mounted independent back
of cab or sleeper
76.5”
Tailpipes side of cab mount, DPF
RH under
Tailpipes back of cab mount, DPF
RH under
68.0”
DIMENSION “B” IS THE TAILPIPE LENGTH.
TABLE 3-21. Unladen Stack Height
For approximate unladen stack height (12,000 pound springs) use the following frame heights:
Tire Size Top of Rail Ft. Suspension
11R24.5
43.5” 12K
11R22.5
42.5” 12K
285/75R24.5
42” 12K
295/75R22.5
41.5” 12K
425/65R22.5
43.2 20K
385/65R22.5
42.4 20K
*Use Prospector frame heights for more accurate results.
Sample: Tailpipe height 13’6” = Desired overall stack height = 162.0”
(–) Prospector frame height (–) 43.5”
(+) Frame rail depth (+) 10.6”
(–) Dimension ‘A’ from chart (–) 68.6”
= Tail pipe length = 60.5”