EN
37
Display and control panel
Operating your fridge
Cooler temperature settings
• Initial temperature value for Cooler Setting Indicator is 6
o
C.
• Press set button once, the set value will start to blink.
• If you keep pressing set button, lower temperatures will be selected (8, 6, 5, 4, 2, super
and eco)
• If no button is pressed for 1 second, your choice will be set, it will blink 3 times. Buzzer
will sound beep beep.
• The temperature value selected before Super Cool Mode or Economy Mode is activated
will remain the same when the mode is over or cancelled. The appliance continues to
operate with this temperature value.
Super cool mode
How would it be used?
Press set button until super cool symbol will be seen on the screen. Buzzer will sound beep
beep. Mode will be set.
During this mode:
• Economy mode can not be selected.
• Super cool mode can be cancelled by the same operation of selecting.
CHAPTER 3. THE VARIOUS FUNCTION AND POSSIBILITIES
o
C
8 6 5 4 2
It is Economy mode
indicator.
Set button
Thermostat set level
indicator
It is Super cool mode
indicator.
Button LED
To Next Page
Loading...
Need help?
General
