EN - 35 -
CHAPTER 5.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and changing of Installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while
transporting.
• Before transporting or changin g th e
installation position, all the moving objects
(ie, drawer, Ice trays, …) should be taken
out or fixed with bands in order to prevent
them from getting damaged.
Carry your freezer in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your freezer door, if the door
handles on your freezer are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your freezer may be changed, you should contact the
nearest Authorised Service to have the opening direction changed.
Replacing LED lighting
If your refrigerator has LED lighting, contact the help desk as this should be changed by
authorized personel only.
To Next Page
Loading...
Need help?
General
