Kero-Sun Omni 105 Type N User Manual

Safety warnings concerning fire and explosion risks associated with heater operation.

Safety warnings related to fire and burn injuries from heater use and contact.

Precautions for safe operation to prevent indoor air pollution and ensure adequate ventilation.

Guidance on purchasing the correct type of kerosene and fuel storage recommendations.

Instructions for safely filling and using the heater's fuel tank.

Recommendations for storing kerosene safely and effectively.

Component description for high heat output without unwanted combustion materials.

Component description that helps maintain good wick performance.

Control for raising/lowering wick for heat adjustment and extinguishing flame.

Covers the fuel tank filling port and is secured by a chain.

Battery-powered igniter for starting the fuel ignition.

Indicates the fuel level in the heater's tank.

Used for rapid wick retraction and extinguishing flame.

Used to check proper seating of the heat chamber after ignition.

Description of the triple wick construction for uniform shape and absorption.

Instructions for removing packing materials and installing the top guard.

Steps for placing the drip tray and positioning the heater.

Guide for inserting batteries into the battery holder.

Procedure for safely fueling the heater with kerosene.

Pre-lighting checks for heater placement and leveling.

Verifying the wick life extender setting before first use.

Checking the automatic extinguisher function before lighting.

Instructions for igniting the heater using the built-in igniter lever.

Procedure for manual lighting with a match if necessary.

How to check and evaluate flame length for optimal combustion.

Adjusting wick height using the wick life extender for proper flame.

Routine weekly inspection and cleaning of the wick.

Checking the igniter coil for proper function each time before use.

Regular checks for kerosene leaks to prevent fire hazards.

Weekly cleaning of heater's outer surfaces and fuel tank.

Weekly cleaning of the heat chamber to remove loose cinders or soot.

Step-by-step guide for replacing the heater's wick.

Instructions for replacing the igniter coil when it becomes defective.

Procedures for replacing the mica window on the heater.

Cleaning procedures before storing the heater for extended periods.

Steps to drain the fuel tank to prevent contamination during storage.

Removing batteries before storing the heater to prevent damage.

Recommendations for storing the heater safely in a dry place.