Need help?Do you have a question about the KERO SRE 301 and is the answer not in the manual?
General| Frequency | 50 Hz |
|---|---|
| Thermostat | Yes |
| Heating Area | 30 m² |
| Safety Features | Overheat protection, Tip-over switch |
| Heater Type | Kerosene |
| Voltage | 230 V |
Key danger, warning, and caution statements regarding heater operation.
Specific warning against using gasoline or inferior fuels to prevent fire.
Instructions on room ventilation and keeping sprays away from the heater.
Guidance on keeping flammable items away and turning off the heater.
Advice on keeping flammable materials and hot parts away from children.
Instructions on safe operation, avoiding disassembly, and fuel tank storage.
Guidelines for safe electrical connections and prohibited usage locations.
Advice on using heat-resistant floors and avoiding specific materials near the heater.
Identification of parts visible on the front of the heater unit.
Identification of parts visible on the back of the heater unit.
Explanation of the timer, ECO, cleaning, lock, and other buttons and displays.
Procedure for unpacking the heater and performing initial checks before use.
Information on power supply and the types of impure liquid combustible to avoid.
Details on using top-quality fuel and storing it away from heat and sunlight.
Instructions on when and how to add liquid combustible to the heater tank.
Description of visual and olfactory indicators of bad quality or unrefined fuel.
Explanation of issues caused by bad fuel and steps to take if used.
Instructions for lifting the tank, filling it correctly, and checking for leaks.
Proper methods for fastening the fuel cap and securely replacing the tank.
How to ignite the heater, normal/abnormal flame indicators, and troubleshooting.
Instructions for turning off the heater and using the 3-hour extension function.
Procedure for setting the internal clock and adjusting time settings.
How to adjust desired room temperature using the +/- buttons.
How to activate ECO mode and its operational behavior regarding temperature.
Step-by-step guide to setting automatic start and duration times for the heater.
How to cancel or reset programmed timer operations.
How to activate/deactivate the child safety lock function.
Understanding the air sensor and general usage restrictions.
Key safety notes including ventilation, room size, and prohibited locations.
Essential checks to perform after each use of the heater.
Regular cleaning of the unit body and warm air blower (louvers).
Procedures for yearly operational checks and monthly fuel filter cleaning.
Steps for replacing the fuel filter if cleaning does not resolve issues.
Steps to take if water mixes with fuel, affecting combustion.
Guidance on the frequency of regular maintenance for optimal performance.
How to start the self-cleaning cycle and what to expect during the process.
Steps to take after cleaning, including storage or preparing for reuse.
Solutions for issues like failure to switch on, fuel odor, or abnormal flames.
Troubleshooting for heater shutdown, bad flame, noise, or abnormal temperature readings.
Details on specific error codes, their causes, and recommended actions.
Interpreting flash codes and persistent errors for further troubleshooting.
Guidance on contacting service agents for necessary part replacements.
Procedure for cleaning the heater and storing it in a suitable location.
Specifications for the heater type, ignition system, and fuel requirements.
Data on fuel consumption, tank capacity, and nominal output in watts.
Information on physical dimensions, weight, voltage, and built-in safety devices.
To Next Page
