Keter FORTOOLS PORTABLECLAMPING WORKSTATION User Manual

12
2
J
J4 - With the clamp in a fully horizontal position, release the front handle to lock the clamp
in place. (To remove the clamp, squeeze the handle and lift up.)
J5 - Depress the release lever and move the front jaw into position against the material to
be clamped. Squeeze the front handle to apply pressure.
J6 - To clamp vertically, insert the clamp through the slot in the tabletop as shown.
5
FSWM1000 17/08/08 11:00 AM Page 5
J1
J2
J3
J4
J5
J6

Keter FORTOOLS PORTABLECLAMPING WORKSTATION Specifications

General

Brand	Keter
Model	FORTOOLS PORTABLECLAMPING WORKSTATION
Category	Desktop
Language	English