KettlePizza Gas Pro Assembly:
Assembly of the KettlePizza Gas Pro is quick and easy. One piece, heavy-
duty stainless steel construction facilitates ease of assembly and will provide
you with years of trouble free use.
1. Remove KettlePizza Gas Pro from box, be careful as the unit is heavy.
Take care not to drop the pizza stone that is in the bottom of the box.
2. Locate thermometer, remove protective bubble wrap as well as wing
nut.
3. Place thermometer shaft into hole on top of KettlePizza unit.
4. Add wing nut to rear of shaft and tighten. Be sure to properly align
thermometer for easy reading as you tighten.
5. Remove stone from protective sleeve and set aside.
Congratulations! Your KettlePizza Gas Pro is now ready for use.
To Next Page
Loading...