Using the heart rate monitor during training
Start your workout as usual. Your heart rate is automatically detected and your sensor is connected to
the device display. A new manual connection is therefore no longer necessary in the Bluetooth setup
menu. During training it is not possible to access the Bluetooth menu by pressing the Bluetooth button.
Disabling or deleting a connection to a heart rate monitor
If a connection to the sensor is interrupted, the message appears. A new connec-
tion is established automatically.
If you move your sensor out of range of the device (>6 meters) or deactivate your heart rate sensor, the
message also appears.
If you want to manage the current Bluetooth device and delete the old connection, use the Bluetooth
Setup Menu.
Link your device to your favourite fitness app
In APP mode, the training display is connected via Bluetooth with a smartphone/tablet/PC
to get an additional training programme via different tness apps.
Once the mode is selected, your treadmill display is ready for other Bluetooth devices
(e.g., smartphone, tablet).
Select the KETTLER treadmill image in the Bluetooth settings of the corresponding Bluetooth device
and this. A generated 6-digit PIN XXXXXX appears on the treadmill display. Enter this PIN into
your device. The training display follows with the message
You are now connected to the terminal and can train with different apps, as long as they are compatible
with the KETTLER Treadmill.
You cannot use your Bluetooth heart rate monitor in this mode. In most cases, however, this can be
integrated directly via the corresponding app.
Note: The APP mode is activated under Start Menu > APP Mode. Any connection to a Bluetooth heart
rate sensor is interrupted.
Which apps are compatible?
For example, use Kinomap, download many videos of realistic routes to your smartphone as training
motivation, and run in locations around the world.
The app is available in the App Store or Google Play Store.
More compatible apps can be found on www.kettlersport.com
To Next Page
Loading...
