EasyManua.ls Logo

Kettler PLSPEAKER - Operating Instructions

Kettler PLSPEAKER
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions
Charging:
Charge for 2-4 hours for the 1st charge.
Plug the adapter in the charging port and plug
into the power supply (100-240V).
When charging the red light will light up and
go o when fully charged.
Always charge in a dry environment.
User guide:
To turn on, hold down the wireless switch for 3
seconds.
Turn on your devices Wireless function and
search for “Luna.
The run time is approx. 6-10 hours.
To turn the light on/o press the “LIGHT”
button.
Warning:
Wireless connectivity will turn o when not
used for 15 minutes.
The sound quality will not be as good quality
when the battery is low.
Use wirelessly for upto 8-10metre range. Any
more than this will aect the sound quality.
Only one device can be connected at any one
time.
Do not allow the speaker unit to get wet.
Store in a dry place when not in use.
1 5 (Can also be tted to pole)
3
2
4
Suitable for parasol
poles 32-38mm
diameter.