7 Watch TheBuildingTutorialOnOurWebsite
f you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
8 Factory Reset
Troubleshooting? Don't know what's going on with the keyboard?
@ Plug in the power cableand factory reset the keyboard by pressing
fn + J + Z (for 4 seconds).
@ Download the right firmware andQMK Toolbox from our website.
@ Unplug the power cableand removethe spacebar keycapto find the
reset button on the PCB.
@ Hold the resetkey first, then plugin the power cable.Releasethe reset
key, and the keyboard will now enter DFIJ mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory resetthe keyboardagainby pressingfn + J + Z (for 4 seconds).
* Step by step guide can be found on our website.
7
To Next Page
Loading...
