Keychron C3 Pro - Understanding Keyboard Layers; Backlight Effects Control

4
The Layers
3
The Backlight
Press FN + Q to change the lighng effect Press FN + TAB to turn the backlight on/off
4
There are four layers of key sengs on the
keyboard. The layer 0 and layer 1 are for the
Mac system. The layer 2 and layer 3 are for
the Windows system.
If your keyboard is switched
to Mac, then layer 0 will be
acvated.
If your keyboard is switched to Windows, then the
layer 2 will be acvated. Remember that if you are
using it in Windows mode, please make changes to
the layer 2 instead of the top layer (the layer 0).
This is a common mistake people are making.
FN + Q FN + TAB