Connect 2.4GHz Receiver
Connect the 2.4GHz receiver to
the device USB port.
2 Connect Bluetooth
4
Switch toggle to 2.4GHz mode
G cable / BT
G = 2.4GHz
Switch togg e to Bluetooth
C / Cable / BT
Type-c
ExtensionAdapter
Cable
For Receiver
2,4GHz
Note: For the best wireless experience,we recommend using the
extension adapter for receiver and putting the 2.4GHz receiver
somewhere on your desk close to your keyboard for a low rate
of latency andfewer signal interferences.
Pressfn + 1 (for 4 seconds) and pair with
device named Keychron K3 Max.
fn + 1
To Next Page
Loading...
