9
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
Factory Reset
8
Troubleshooting? Don't know what's going on with the keyboard?
@ Plugin the power cableandswitch the keyboardto Cablemode.
@ Factory resetthe keyboardby pressingfn + J + Z (for 4 seconds).
@ Download the right firmware and QMK Toolbox from our website.
@ Switch the keyboardto OFFmode andremove the spacebar keycap
to find the reset button on the PCB.
@ Hold the reset key first, then switch the keyboardto Cablemode.
Release the reset key, and the keyboard will now enter DFU mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory resetthe keyboardagainby pressingfn + J+ Z (for 4 seconds).
* Step by step guide can be found on our website.
To Next Page
Loading...
