Keychron K7 Pro - Setup and Maintenance; Factory Reset Procedure

9 WatchTheBuildingTutorialOnOurWebsite
f you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
10 FactoryReset
Troubleshooting? Don't know what's going on with the keyboard?
@ Plugin the power cableand switch the keyboardto Cablemode.
@ Factory reset the keyboardby pressingfn2 + J+ Z(for 4 seconds).
@ Download the right firmware and QMK Toolbox from our website.
@ Switch the keyboardto OFF modeand remove the spacebar keycap
to find the reset button on the PCB.
@ Hold the resetkey first, then switch the keyboardto Cablemode.
Releasethe reset key, and the keyboard will now enter DFU mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory reset the keyboardagainby pressingfn2 + J+ Z (for 4 seconds).
* Step by step guide can be found on our website.
8