BLUETOOTH/WIRED MODE (TOGGLE SWITCH)
WIRED MODE
I.Switch the toggle switch to Cable option (it only works when a USB cable is plugged in).
2.Connect our cable with your PC and keyboard.
3.Backlit will be turned on.
*Under Wired Mode, keyboard will not enter into Battery Saver Mode.
BLUETOOTH MODE
1. Switch the keyboard to Bluetooth option.
2. Backlit will be turned on.
3. Hold "Fn+l" key for 4 seconds to activate Bluetooth pairing (the Bluetooth indicator fast flashes
for 3 minutes to detect pairing.
4. Search for the Bluetooth device "Keychron K8 Pro" on your device and connect it (the Bluetooth
indicator goes off after successful pairing).
Note: This keyboard supports pairing up to 3 devices simultaneously via combination key
"fn"+ I / fn+2/ fn + "3".
*The Bluetooth indicator will continue to flash for 3 minutes.
**Slow or failed connections may exist due to different Bluetooth versions, please make sure all the
settings are correct.
17
To Next Page
Loading...
