9 Watch TheBuildingTutorialOnOurWebsite
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
Factory Reset
Troubleshooting? Don't know what's going on with the keyboard?
@Try factory resetby pressingfn + J + Z (for 4 seconds).
@ Downloadthe right firmware for your keyboardfrom our website.
Remove the power cable from the keyboard.
@ Removethe spacebar keycapto find the resetbutton on the PCB
and switch the keyboard to cable mode.
@ Hold the reset key while pluggingin the power cableandthen
release the reset key. The keyboard now will enter DFIJ mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factoryreset the keyboardagain by pressingfn + J+ Z (for4 seconds).
* Step by step guide can be found on our website
8
To Next Page
Loading...
