3 Watch TheBuildingTutorialOnOurWebsite
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
4 Factory Reset
6
Troubleshooting? Don't know what's going on with the keyboard?
@Try factory reset by pressing O+9 + 1 (for 4 seconds)
@ Download the right firmware for your keyboardfrom our website.
Remove the power cable from the keyboard.
@ Removethe "O"and "." keycapto find the resetbutton on the PCB.
@ Hold the reset key while pluggingin the power cableand then
release the reset key. The keyboard now will enter DFIJ mode.
@ Flashthe firmware with the QMK Toolbox.
@ Factory reset the keyboardagainby pressing0 +9 + 1 (for 4 seconds)
* Step by step guide can be found on our website
To Next Page
Loading...
