SAFETY PRECAUTIONS
Precautions for Installation
ELECTRIC SHOCK!!!
Install the earthing device according to the applicable standard.
Do not touch live parts while bare skin or wearing wet gloves or
clothes.
Insure you to insulate appearance with the ground and the work
piece.
The cover plate must be covered before power on, otherwise it may
cause electric shock.
Make sure that your workstation is in a safe state.
FIRE!!!
Please install the product on non-combustible objects, otherwise
there is a risk of fire.
Do not put combustible materials nearby, otherwise there is a risk
of fire.
EXPLOSION HAZARD!!!
Do not install the product in an environment containing explosive
gas, otherwise there is a risk of an explosion.
Replacing parts and components may cause danger
Only professionals can replace the parts.
Do not drop foreign objects such as thread ends, screws, gaskets and metal bars
into the welder when replacing parts.
After replacing the circuit board, the internal connection of the welder shall be
correct before the welder can be operated, otherwise there is a risk of property
damage.
To Next Page
