Keysight Technologies M9411A Quick Reference

3. After the FPGA is updated, the launcher window will be pop up as below. All the installed modules
will be shown as "Idle" status. Select the needed module in the launcher. Click Run Selected and
the TRX application of the selected module will be launched immediately.
To use the interactive help system of TRX applications, please click Help key on the bottom
bar. For the further information, please refer to the links as below.
Description URL
Product Information
http://www.keysight.com/find/xxx
*
*. "xxx" indicates the product number. If you are looking for the M9410A product page, please refer to
http://keysight.com/find/m9410a for details.
Product Documents http://www.keysight.com/find/xxx -> Resource Center
TRX Software
†
†. IO Libraries Suite is included in the TRX software
http://www.keysight.com/find/xxx -> Support -> Drivers, Firmware & Software
M9300A Soft Front Panel http://www.keysight.com/find/m9300a -> Support -> Drivers, Firmware & Software
This information is subject to change
without notice.
 Keysight Technologies 2019-2021
Edition 4, August 2021, Printed in Malaysia
*M9410-90014*
M9410-90014
www.keysight.com

Keysight Technologies M9411A Specifications

General

Brand	Keysight Technologies
Model	M9411A
Category	Transceiver
Language	English