256
Chapter 4 Remote Interface Reference
The SCPI Status System
4
The Questionable Data event register is cleared when:
• You execute the *CLS (clear status) command.
• You query the event register using the
STAT:QUES:EVEN?
command.
The Questionable Data enable register is cleared when:
• You turn on the power (the *PSC command does not apply).
• You execute the STAT:PRES command.
• You execute the STAT:QUES:ENAB 0 command.
33210A users guide.book Page 256 Wednesday, July 16, 2008 11:16 AM
To Next Page
Loading...
