Getting Started 1
Keysight 34980A Getting Started Guide 35
2 Select channel 27 on the module by pressing 2 and then 7.
3 Press the lighted ENTER key to complete your channel selection.
4 With channel 1027 selected (shown in green channel field on display), toggle
the Close and Open keys to close and open the selected channel. Note that
the display shows OPEN or CLOSED, indicating the status of the channel.
Menu Example: Setting the Time and Date
In this example, you will learn the fundamentals of using the 34980A front-panel
menus by setting the date and time. Begin by pressing the Utility menu key as
shown in the diagram. Follow the menu prompts as they are displayed.
A list of menu hints is provided below. Use this information as you navigate
through the menu structure. For an overview of the front panel keys, see page 17.
To Next Page
Loading...
