Getting Started 1
Keysight 34980A Getting Started Guide 59
different module, click on the desired module name from the list (slots are
numbered 1 through 8).
Selecting the “Allow Full Control” Mode
Select the Allow Full Control radio button as shown. Once enabled, this mode
allows you to open and close channel relays and modify the state of the installed
modules.
If desired, you can use the 34980’s front panel Utility menu to assign a password
for use with the 34980A Web Interface. Once specified, the password must be
provided to transition from the Observe Only mode to the Allow Full Control mode.
To Next Page
Loading...
