SYSTem:BATTery:ENABle
Syntax
SYSTem:BATTery:ENABle {OFF | ON}
SYSTem:BATTery:ENABle?
Description
This command enables or disables the battery operation (if present).
Remarks
l The battery is shipped from the factory in the disabled state to prevent discharge of the battery during
shipping.
l The battery enable state is stored in non-volatile memory, and does not change when power has been
off, after a Factory Reset (*RST command), or after an Instrument Preset (SYSTem:PRESet command).
l The battery is disabled when the instrument is shipped from the factory or after a SYSTem:SECur-
ity:IMMediate command.
Return Format
The query returns the battery enable state: 0 (OFF) or 1 (ON).
Example
The following example enables battery operation.
SYST:BATT:ENAB ON
See Also
Keysight 53220A/53230A Programmer's Reference 437
SYSTem:BATTery:ENABle
To Next Page
Loading...
