42 Keysight E5052B Signal Source Analyzer
Troubleshooting
System Recovery
3-
Step 9. After the restart, execute initial registration. For information on the execution
procedure, refer to “Initial Registration of E5052B” on page 26.
Procedure for Windows Vista Business
HDD Revision: NM32x
Step 1. Turn ON the E5052B.
Step 2. The boot option is displayed. Use the downward arrow key to select the
“Keysight Recovery Solution” and press Enter
Step 3. Windows PE starts up and “Keysight Recovery Program” window is d isplayed.
Press 1, and then press Enter.
Figure 3-6 Keysight Recovery Program(1/1)
Step 4. A warning message is displayed. Press 1, and then press Enter.
Never turn off the power during the system recovery because doing so
may cause serious damage to the E5052B.
Only the recover y fun ct io n fo r Fac to r y image is loaded .
The User backup function is not available.
You need a keyboard for this operation.
To Next Page
Loading...
