Specifications
UHD100T32
Perpetual
Part number: 944-
1180
UHD100T32
Base Subscription
Part number:
U100-BASE
UHD100T32
Standard
Subscription
Part number: U100-
STANDARD
o
Pluggable transceiver
o
40GE speed not compatible with 100GBASE-LR4 QSFP28. Must
use 40GBASE-LR4 QSFP transceiver for 40GE speed
l 100G PSM4 QSFP28 for single mode fiber
o
Pluggable transceiver
o
100GE support requires a point-to-point cable
o
25GE support requires a point-to-point or a fan-out cable
Cable Media l 100GBASE-SR4 multimode fiber Active Optical Cable (AOC) and MT-
MT 12-fiber point-to-point cables for QSFP28
l 100GBASE-CR4, passive, copper Direct Attached Cable (DAC) up to
five meters in length
Note: Requires RS-FEC to be enabled
l 50GBASE-CR2 passive, copper Direct Attached Cable (DAC) QSFP28-
to-2×QSFP28 fan-out media, up to 3 meters in length
Note: Requires BASE-R FEC Clause 74 or RS-FEC Clause 91 to
be enabled
l 50GBASE-SR2 multimode fiber Active Optical Cable (AOC) media, 850
nm, three meter length
l 25GBASE-SR multimode fiber Optical Cable (AOC) and MT-MT 12-fiber
point-to-point cable for QSFP28, three meter length is available
l 25GBASE-SR multimode fiber MT-to-4×LC fan-out cable for QSFP28,
three meter and five meter lengths are available
l 25GBASE-LR single mode fiber MT-to-4×LC fan-out cable for QSFP28,
three meter length is available
l 25GBASE-CR passive, copper Direct Attached Cable (DAC) point-
point, up to five meters in length
Note: Requires BASE-R FEC Clause 74 or RS-FEC Clause 91 to
be enabled
l 25GBASE-CR passive, copper Direct Attached Cable (DAC) QSFP28-
to-4×SFP28 fan-out media, up to five meters in length
Note: Requires BASE-R FEC Clause 74 or RS-FEC Clause 91 to
be enabled
Chapter 1 About UHD100T32
913-2626-01 – 4 –
To Next Page
Loading...
