Keysight ixia UHD100T32 - Date and Time Commands

kcos date-time date set
Use the kcos date-time date set command to set the UTC (Coordinated Universal Time) system date
and—optionally—the time for the node on which KCOS is running.
Syntax
kcosdate-time date set [flags] <YYYY-MM-DD> <hh:mm:ss>
Flags
-h, --help Display help for the command
Arguments
<YYYY-MM-DD> The date.
<hh:mm:ss> The time (using 24-hour notation).
Examples
kcos date 2020-09-24
kcos date 2020-11-04 22:01:30
See also
kcos date-time date show
kcos date-time time-zone set
Notes
Use "kcos date-time time set" to set the time only.
Appendix A KCOS CLI command reference
– 39 – 913-2626-01