Keysight N9000A - Measurement Performance Techniques

Chapter 1 31
Overview
Service Equipment You Will Need
Attenuator
Interconnect Kit
Type N connector kit to connect 8496G to 8494G 11716A P
Attenuator Driver Compatible with the 8496G and 8494G step
attenuators.
11713A P
6dB
Fixed Attenuator
6 dB Type-N (m, f)
VSWR: at 50 MHz: ≤ 1.05:1
8491A
(Option 006)
8491B/C
(Option 006)
P
10 dB
Fixed Attenuator
10 dB Type-N (m, f)
VSWR: at 50 MHz: ≤ 1.05:1
8491A
(Option 010)
8491B/C
(Option 010)
A, P
10 dB
Fixed Attenuator
10 dB 3.5 mm (m, f)
VSWR: 50 MHz to 19.5 GHz: ≤ 1.25:1
8493C
(Option 010)
A, P
20 dB
Fixed Attenuator
20 dB Type-N (m, f)
VSWR: 10 MHz: ≤ 1.20:1
8491A
(Option 020)
8491B/C
(Option 020)
A
30 dB
Fixed Attenuator
30 dB
Accuracy: ± 0.5 dB
VSWR: 1.05 @ 50 MHz
(For use with Low Power Sensors
)
11708A A, P
Terminations
Type-N (m)
(for Option 503, 508, 513)
50 Ω
Frequency: 10 kHz to 18 GHz
VSWR: ≤ 1.05:1
909A
(Option 012)
P, T
3.5 mm (f) 50 Ω
VSWR: ≤ 26.5 GHz: ≤ 1.12:1
909D P, T
BNC (m) 50 Ω
Frequency: 50 Hz to 300 kHz
1250-0207 P
Miscellaneous Devices
RF Power Splitter Frequency: 9 kHz to 3.6 GHz
VSWR: ≤ 1.10:1
Tracking Error: < ± 0.15 dB
Connector: Type-N (f)
11667A P
Microwave Power Splitter Frequency: 10 MHz to 26.5 GHz
VSWR: 10 MHz to 3 GHz: < 1.06:1
3 GHz to 26.5 GHz: < 1.22:1
Tracking Error: < ± 0.25 dB
Connector: 3.5 mm (f)
11667B
(Option H30)
11667B
(std.)
P
Microwave Power Divider
(for Option BBA)
Frequency: DC to 40 MHz
VSWR: < 1.10:1
Tracking Error: < ± 0.25 dB
Connector: 3.5 mm (f)
11636B P
Table 1-1 Required Test Equipment
Instrument Critical Specifications Recommended
Agilent Model
Number
Alternative
Agilent Model
Number
Use
a