Keysight N9010B - Page 32

Table Of Contents
Detector 1063
Detector Select Auto/Man 1065
3.6.10.5 Trace Function 1065
From Trace 1066
To Trace 1066
Copy 1066
Exchange 1067
Preset All Traces 1067
Clear All Traces 1067
3.6.10.6 Advanced 1068
Measure Trace 1068
3.7 Power Stat CCDF Measurement 1069
3.7.1 Views 1071
3.7.1.1 Normal 1072
3.7.2 Windows 1072
3.7.2.1 Graph 1072
3.7.2.2 Metrics 1073
3.7.3 Amplitude 1075
3.7.3.1 Y Scale 1075
Minimum Probability 1075
3.7.3.2 Attenuation 1076
Full Range Atten 1078
Mech Atten 1079
Elec Atten 1082
Adjust Atten for Min Clipping 1086
Adjust Atten 1086
Pre-Adjust for Min Clipping 1086
Mech Atten Step 1090
3.7.3.3 Range (Baseband Input models) 1091
Range Auto/Man 1091
I Range 1092
Q Range 1094
Q Same as I 1095
3.7.3.4 Range (Non-attenuator models) 1095
Range 1096
Adjust Range for Min Clipping 1096
Pre-Adjust for Min Clipping 1096
Peak-to-Average Ratio 1097
Mixer Lvl Offset 1098
3.7.3.5 Signal Path 1098
Presel Center 1099
Preselector Adjust 1100
32 Vector Modulation Analyzer Mode User's &Programmer's Reference