Table Of Contents
Offset/Limits Config Table 1559
3.9.18.3 Reference 1559
Measurement Type 1559
Reference Power 1560
Power Ref 1560
Carrier Index 1566
Total Power Ref 1566
PSD Ref 1567
Spectrum Pk Ref 1567
Measure All Ref Carriers 1568
Offset/Limits Config Table 1568
3.9.18.4 Advanced 1568
Noise Floor Extension 1569
Enable Wideband IF for FFT 1572
3.9.18.5 Global 1573
Global Center Freq 1573
Global EMC Std 1574
Restore Defaults 1575
3.9.19 Sweep 1575
3.9.19.1 Sweep/Control 1575
Sweep/Measure 1575
Restart 1577
Pause/Resume 1580
Abort (Remote Command Only) 1580
3.9.19.2 X Scale 1581
Ref Value 1581
Scale/Div 1581
Ref Position 1582
Auto Scaling 1582
3.9.19.3 Sweep Config 1582
Points 1583
IF Dithering 1583
Image Protection 1583
3.9.20 Trace 1584
3.9.20.1 Select Trace 1584
3.9.20.2 Trace Control 1584
Trace Type 1585
Clear and Write | Restart Averaging | Restart Max/Min Hold 1590
View/Blank 1590
3.9.20.3 Math 1593
Math Function 1593
Operand 1 / Operand 2 1599
Offset 1600
Vector Modulation Analyzer Mode User's &Programmer's Reference 45
To Next Page
Loading...
