Table Of Contents
Threshold Level 1319
IF Gain 1320
Meas Setup Summary Table 1321
Auto Couple 1321
Meas Preset 1323
3.7.8.2 Meas Method 1323
Meas Method 1323
Burst Width Auto Detection 1324
Burst Width 1324
3.7.8.3 Meas Standard 1325
Radio Standard Presets 1325
Enable Non-Std Meas 1339
3.7.8.4 Global 1339
Global Center Freq 1340
Global EMC Std 1340
Global Limit Lines (Freq and Amptd) 1341
Extend Low Band 1342
Restore Defaults 1342
3.7.9 Sweep 1342
3.7.9.1 Sweep/Control 1343
Sweep Time 1343
Sweep/Measure 1343
Restart 1345
Pause/Resume 1348
Abort (Remote Command Only) 1348
3.7.9.2 X Scale 1349
Ref Value 1349
Scale/Div 1349
Ref Position 1350
Auto Scaling 1350
3.7.10 Trace 1350
3.7.10.1 Trace Control 1351
Max Hold Trace 1351
Min Hold Trace 1351
3.8 Spurious Emissions Measurement 1352
3.8.1 Views 1354
3.8.1.1 Graph + Metrics 1354
3.8.1.2 All Ranges 1355
3.8.2 Windows 1355
3.8.2.1 Graph 1355
3.8.2.2 Table 1356
32 Spectrum Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
