Table Of Contents
3.8.2.3 All Range Table 1357
3.8.2.4 Gate 1358
3.8.2.5 Marker Table 1358
3.8.3 Amplitude 1358
3.8.3.1 Y Scale 1358
Ref Value 1359
Scale/Div 1359
Scale Range 1360
Y Axis Unit 1360
Ref Level Offset 1365
Ref Position 1366
Auto Scaling 1366
3.8.3.2 Attenuation 1367
Full Range Atten 1369
Mech Atten 1370
Elec Atten 1373
Adjust Atten for Min Clipping 1377
Adjust Atten 1377
Pre-Adjust for Min Clipping 1377
Mech Atten Step 1381
Max Mixer Level 1382
Max Mixer Lvl Rules 1382
3.8.3.3 Range (Non-attenuator models) 1383
Range 1384
Adjust Range for Min Clipping 1384
Pre-Adjust for Min Clipping 1384
Peak-to-Average Ratio 1385
Mixer Lvl Offset 1386
3.8.3.4 Signal Path 1386
Presel Center 1387
Preselector Adjust 1388
Internal Preamp 1389
LNA 1391
µW Path Control 1392
Software Preselection 1401
SW Preselection Type 1403
SW Preselection BW 1404
High Freq Prefilter 1404
3.8.4 BW 1406
3.8.5 Display 1406
3.8.5.1 Meas Display 1406
Center Frequency On/Off 1406
3.8.5.2 Annotation 1406
Spectrum Analyzer Mode User's &Programmer's Reference 33
To Next Page
Loading...
