Keysight N9030B - Page 34

Table Of Contents
Couple Markers 1138
3.7.7.3 Properties 1138
Marker X-Axis Value 1139
Relative To 1139
Marker Trace 1139
Marker Settings Diagram 1140
3.7.8 Meas Setup 1140
3.7.8.1 Settings 1140
Counts 1140
Meas Cycles 1141
Meas Interval 1141
Meas Setup Summary Table 1141
Auto Couple 1142
Meas Preset 1143
3.7.8.2 Advanced 1144
IF Gain 1144
IF Upsampling Ratio 1145
3.7.8.3 Global 1145
Global Center Freq 1145
Global EMC Std 1146
Restore Defaults 1147
3.7.9 Sweep 1147
3.7.9.1 Sweep/Control 1147
Sweep/Measure 1147
Restart 1149
Pause/Resume 1152
Abort (Remote Command Only) 1152
3.7.9.2 X Scale 1153
Scale/Div 1153
3.7.10 Trace 1153
3.7.10.1 Trace Control 1153
Store Ref Trace 1153
Ref Trace 1154
Gaussian Line 1154
3.8 ACP Measurement 1155
3.8.1 Measurement Results for n = 1, or no Index Specified 1158
3.8.2 Measurement Results for n = 2 1161
3.8.3 Measurement Results for n = 3 1162
3.8.4 Measurement Results for n = 7 1163
3.8.5 Measurement Results for n = 8 1164
34 Vector Modulation Analyzer Mode User's &Programmer's Reference