Keysight N9030B - Page 61

Table Of Contents
Insert Waveform 2004
Segments in ARB Memory 2004
Delete Segment From ARB Mem 2005
Delete All From ARB Memory 2005
Delete Segment 2005
Save Sequence 2005
Build New Sequence (Remote Command Only) 2005
Edit Selected Sequence 2008
Segment 2008
Waveform 2008
Repetitions 2008
Marker 1 – Marker 4 2008
Sync Seq File 2009
Insert Waveform 2009
Segments in ARB Memory 2010
Delete Segment From ARB Mem 2010
Delete All From ARB Memory 2010
Delete Segment 2010
Waveform Utilities 2010
Add Waveform 2010
Replace Selected Waveform 2011
Clear Waveform from Slot 2012
Lock Waveform in Slot 2012
Slot Status Query (Remote Command Only) 2013
Slots Free Query (Remote Query Only) 2013
Slots Used Query (Remote Query Only) 2013
Slot Waveform Name Query (Remote Command Only) 2014
Slot Waveform Unique ID Query (Remote Command Only) 2014
Locked Waveform Name List Query (Remote Query Only) 2015
Locked Waveform Unique ID List Query (Remote Query Only) 2015
Multi-Pack License multi-module control state (Remote Command Only) 2015
Header Utilities 2016
Clear Header 2016
Save Header 2016
Query Waveform Unique ID (Remote Query Only) 2016
Query Selected Waveform Header info (Remote Query Only) 2017
6.1.12 Trigger Initiate 2018
6.1.13 Source Sync 2018
6.1.13.1 Sync Config 2018
6.1.13.2 Sync Type 2019
6.1.13.3 Sync Settings 2020
Secondary Module List 2020
Sync Settings 2021
Sync Segment 2 2022
Segment 2 Frequency 2022
IP Address 2023
SCPI Socket Port 2023
Short Range Comms & IoT Mode User's &Programmer's Reference 61